Movable Expandable Modular Shipping Container Homes

Yes, within the limits of utility connection. The KXD-5105 20ft expandable modular container home is supplied with its bathroom (washing cabinet with mirror, ceramic washbasin, ceramic toilet, and integral shower room with PPR supply and PVC drainage pipework), kitchen (high-density particleboard cabinet with sink), electrical system (installed circuit, 6 LED lights, 8 sockets, 20A circuit breaker), flooring (MGO board, bamboo, and 2.0 mm PVC overlay), ceiling tile, roof tile, aluminium alloy doors and windows, and all structural insulation panels factory-fitted and inspected before packing. On-site, the buyer needs to position the unit, expand and lock the side panels, and connect to site water supply, drainage, and electrical mains. No on-site wet trades, joinery, or electrical rough-in is required.

Two complete KXD-5105 units fit in a single 40HQ shipping container. Each unit weighs 3,000 kg, so the combined load of two units is 6,000 kg — well within standard 40HQ payload limits for most international shipping routes. This 2:1 loading ratio directly reduces per-unit freight cost compared with container home systems that require one container per unit. The minimum order quantity is 1×40HC (2 units). For buyers ordering larger volumes, KXD can coordinate partial or full vessel booking arrangements.

The KXD-5105 is rated for a structural lifetime of over 50 years. The primary frame is manufactured from Q235B structural steel throughout — t2.5 mm for beams, members, and subframe; t4 mm for the hanger; and 13 mm galvanized steel for the hinges. This material specification is consistent with permanent prefabricated building practice, not temporary shelter standards. The unit is suitable for long-term or permanent installation subject to the buyer obtaining applicable local planning, zoning, or building permit approvals for the intended use classification. KXD recommends confirming regulatory requirements in the destination market before finalising the order.

Yes. The window type is available in aluminium alloy, PVC, or steel as standard options. The wall and roof insulation core can be specified as either EPS sandwich panel or rock wool panel to match the thermal performance requirement of the installation climate. The electrical specification — including voltage, socket type, and circuit breaker rating — can be adjusted before factory installation to meet the destination market’s wiring standard. Buyers are strongly advised to confirm electrical requirements at the enquiry stage, as post-factory electrical modifications are not cost-effective. Other customisation options, including exterior colour, kitchen fitting specification, and bathroom fixture grade, are available; confirm specific requirements at enquiry.

KXD’s Qingdao manufacturing facility holds ISO 9001:2015, CE (EN1090), ISO 14001, and ISO 45001 certifications. Structural fabrication meets GB50661-2011 welding standards (equivalent to AWS D1.1). Full fabrication documentation — material certificates, welding records, and dimensional inspection reports — is maintained for traceability on all export orders. Third-party pre-shipment inspection by SGS, BV, TÜV, or any other buyer-nominated inspection agency can be arranged and scheduled within the production timeline. Buyers who require inspection documentation for procurement compliance, project finance approval, or government tender submissions should confirm this requirement at the enquiry stage.