Steel structure installation and construction is a complex project, before the construction of the staff must be prepared to better carry out the reinforcement shed installation and construction engineering, to ensure safety, specific and steel structure manufacturer installation experts share it!

In order to guarantee workers' safety strictly, the corresponding responsibility system should be established. Before construction, safety technology education and disclosure shall be gradually carried out, and all safety technical measures and personal safety technical measures and personal protection articles shall be implemented, and no construction shall be carried out until such measures are implemented. The facilities and equipment in aerial work must be checked before construction to ensure that they are in good condition before being put into use.

In order to reduce the risk of steel structure construction, our company should use steel hanging ladder or ladder mounted on steel column when installing steel structure parts and reinforcing bar shed. Lifting ladder or steel pipe scaffold should be set at both ends according to steel dyeing height when steel beam is ascending. Steel roof frame on and off the string when climbing, triangular roof frame should be located at the ridge, trapezoidal roof frame should be located at both ends, climbing should be set up and down ladder.

In the course of the operation, the use of building structures or scaffolding climbing equipment, the use of manned vertical transport equipment, while climbing operations, the use of ladders or other climbing equipment. Vertical ladders and other pull-up parts for climbing required for hoisting columns, beams and members shall be specified in the construction drawings or instructions of the members, and the climbing apparatus shall be firm and reliable in its structure. The bottom of the ladder should be pad solid, can not pad high use, the top of the ladder should be fixed measures.

Compared with traditional concrete building, steel structure engineering uses steel plate or section steel instead of reinforced concrete, which has higher strength and seismic performance. And because components can be factory-built and installed on site. Therefore, the construction period is greatly shortened and widely used.