Gallinero con suelo de rejilla de plástico fácil de limpiar

A poultry broiler plastic floor is a slatted, interlocking grid panel system installed as the primary floor surface inside a commercial broiler house. Unlike conventional litter-based floor systems — where wood shavings, rice husks, or straw are spread across a concrete base and replaced or composted between flocks — a plastic slatted floor creates a physical separation between the bird contact zone and the manure collection zone beneath the panels. Manure falls through the open grid and accumulates below, keeping the surface where birds stand and feed consistently drier and cleaner. This structural difference directly reduces footpad dermatitis risk, lowers ammonia build-up at bird level, and significantly reduces the labour and biosecurity risk associated with litter removal and between-batch cleanout.

The number of panels required is calculated from the internal floor area of your broiler house divided by the individual panel footprint. KXD’s standard panel measures 120 × 50 cm, giving a coverage area of 0.6 square metres per panel. For a full house coverage estimate, divide your total internal floor area (in square metres) by 0.6. KXD’s team can assist with layout planning if you provide your house internal dimensions (length × width). Contact KXD’s team with your house dimensions to receive a confirmed panel count and layout recommendation.

The easy cleaning slatted floor design supports both in-place washdown and full panel removal for deep cleaning. For standard between-batch biosecurity protocols, panels can be pressure-washed and chemically disinfected in position — the smooth PP/PVC surface resists manure adhesion and allows complete mechanical and chemical cleaning without panel removal. For full depopulation cleanouts or periodic deep biosecurity procedures, individual panels or full rows can be unclipped, removed, pressure-washed externally, and reinstalled. This dual-mode cleaning flexibility is specifically designed to match commercial broiler farm batch management schedules.

Yes. The panel system is designed for installation in standard commercial broiler house layouts that include automated feeder line tracks, nipple drinker lines, and brooder equipment. The 120 × 50 cm panel geometry and interlocking joint design allow feeder line support posts and drinker line stanchions to be positioned at panel joints or within the grid structure without compromising floor continuity. If your broiler house uses a specific feeder or drinker system with non-standard column spacing, KXD’s team can advise on panel layout configuration at the inquiry stage.

KXD supplies the plastic slatted floor panels as a standalone product, with a minimum order quantity of 100 pieces, suitable for single-house upgrades, floor replacement programmes, or phased farm fit-outs. The panels are also available as part of KXD’s fully integrated, turnkey broiler house solution — which includes the steel structure building, insulation panels, automated feeding and watering systems, manure removal equipment, ventilation and cooling systems, and environment control systems. Buyers planning a new-build commercial broiler facility may benefit from consolidating both the structural and equipment supply with a single project partner to ensure full dimensional and operational compatibility across all systems.